Parker 721TC hose

[powerscol]

My local Bobcat Dealer uses the Parker 721TC hose in making theirs - including the fittings. They have made up a couple to replace hoses on some of my hay equipment. They are very reasonable and they look well made. I know nothing about this hose and cant seem to find specifications to actually what it is. Parker says it exceeds 100R16 for what that's worth.

I got my mounting plate fabricated for my 3rd function and I think I can get a clean bend on a hose to the T port, if it will bend tight enough.

Before I go to them with the sizing I just need to know if this Parker hose is good enough for my 3rd function or should I go with 100R16 from several online sources?

Thanks Folks

 

[MORRISONSTEEL]

It is a pretty tough hose, if I understand it right is a 100r12 4 wire hose and should be able to handle higher pressure than the 100r16 2 wire hose but may not be as flexible in tighter applications. The tc stands for tough cover and has a heavier cover than the std 721 hose. Parker 471tc is what our dealer mostly sells.

 

[powerscol]

Thanks