part missing

[budgeary]

The attached picture shows a 3/4'' threaded hole where something is missing on my 83' 1520 ford diesel tractor under the throttle pedal. Anyone know what's suppose to be there? A plug? breather port??

 

[joefromga]

Mount for a step?

 

[DT86]

Mount for a step?

In my experience a step mount would be into a blind hole, that looks like it goes all the way into the case.

 

[smstonypoint]

I can't answer your question, but you might be able to figure out the purpose of the hole by looking at the parts diagrams for 1520s at New Holland (152) - 3 CYL COMPACT TRACTOR 2 SERIES (1/87-12/97) Parts Diagrams.

Steve

 

[banjodunn]

G'day I would say it's a level plug for the trans.
You might want to check the other loader frame bolts in the first pic looks like they might be a bit loose.

Jon

 

[skyhook]

I'd have to agree with banjodunn, looks like a fill hole for the trans.

 

[joecdeere]

Looks from the pics like this is the bell housing area, it would be a dry area, no liquids

 

[skyhook]

Looks from the pics like this is the bell housing area, it would be a dry area, no liquids

Na, the bell housing is further left of that hole, you can see the bolts to the engine.

 

[powerscol]

Strange - entering the model number AH4137 (plate in picture) gives no results in new holand parts look up. I like a mystery and per the parts diagram listed above the hole goes into the clutch case. Maybe an inspection hole? Might be worth a call to a NH dealer.

However you can also check with the folks on this forum Antique Tractors - Yesterday's Tractors : Parts and Online Community under Ford. They were a great help on my 503 rake.

Hope this helps

 

[lilranch2001]

I would ask Soundguy, he is the most knowledgeable person I know on all things Ford Tractor

 

[lilranch2001]

I PMed him, maybe he can weigh in

 

[budgeary]

The attached picture shows a 3/4'' threaded hole where something is missing on my 83' 1520 ford diesel tractor under the throttle pedal. Anyone know what's suppose to be there? A plug? breather port??

I was miss informed, the tractor year is a 1990. and the hole is beside the clutch pedal not the throttle pedal.

 

[Soundguy]

Bellhousing area, so dry. Straight bolt thread or pipe?

Never owned a 1520... 90's are kinda new machines

If it had been a bigger hop with rubber plug I'd maybee have said a port for getting a grease gun tube in there for greasable bearings.

 

[budgeary]

I'd say bolt thread, but I'll ck and let you know.