Parts Availability for Cub Cadet EX3200

[TractorFeverFL]

I came across a post on Bruno's for a Cub Cadet Yanmar EX3200 that appears to have sold for $11760 earlier this year.

It seems that this tractor model has been discontinued. There also seems to be some Yanmar dealers around although not as many as for the other brands.

For those of you who own an EX3200, how is the parts availability?

 

[newsleet]

ran into trouble getting hyd. hoses for the loader, the selling dealer sent me to a NAPA store to have them made. Ran about $150 for the 4 25 inch hoses.
The dealer said most of the tractor is Yanmar and parts could be cross referenced

 

[msb1766]

Parts a readily available, Find a local dealer they can order them.
I just called my dealer and ordered tail light assemblies for my 2009 Sc2450 tractor.
If you need parts and you can not find a local dealer here is my dealers info:
Emerich Sales & Service | Charlton, NY | OPE Dealer
Also:Messicks | Your home for New Holland, Case IH, Kubota & More...
Either one will ship the parts to you.

 

[jethroish]

"Knock on wood" I have not needed any parts except the I had a steel hyd. line for the loader blow out. Local dealer where I bought it could get me the "factory" bent steel lines, but would be 2 weeks. Went to a local hydraulic repair shop. They made me rubber hoses and their prices was lower than dealer.
Original post mentioned sale for $11760 in Aug 2019. I have been researching pricing. Considering selling my 2010 EX3200 with about 330hrs. Either no one parting with them or not that many out there at all.

 

[wdineen]

Rare is beautiful

 

[Sawguy50]

I've had mine since 2010. Got 440 hrs and not one problem. My selling dealer got rid of the line and went with Mahindra.

 

[California]

I've had mine since 2010. Got 440 hrs and not one problem. My selling dealer got rid of the line and went with Mahindra.

Welcome!

Where was it that the Yanmar dealer switched to Mahindra?

 

[Sawguy50]

Sioux Falls, SD

 

[Yander]

There's a very nice low hour Yanmar/cub EX3200 for sale near me for only $12k. It is a really nice looking tractor. For the guys who own them, is the loader lift really 900lb at the pin? That's pretty terrible. Is Tractordata.com wrong?

My SA425 is 1200lb. loader lift. I wouldn't mind having a little more HP for bush hogging.

 

[hankross]

How many hours? My circa 2009 Ex3200 Tractor Loader Backhoe (TLB) has been pretty awesome... 2 batteries, a hydraulic hose and an intermittent temp gauge along with filters and fluid changes. When we lived back east (TN/MS), I ran a 5 foot bush hog on it and it seemed to work OK - no complaints. I'm glad we held on to the machine when we moved west to AZ. I've found it to be a very well engineered machine and the 900 pound loader lift capacity was initially of concern to me but I've had no issues in practical use. A bigger bucket/higher capacity would always be nice but the existing one has served us well. Yanmar builds a quality machine and I believe the capacities are conservatively rated. Good luck with your decision.