Parts Diagram and/or Owners Manual for Century 2535 (made by Kukje) tractor

[Qcarritt]

I have the Century manual for a 2535 and the shop manual for it. Mine is a 2004 model. It is not bound so that it can be easily scanned, but if there is a particular section you need let me know and I will try to scan it. I have had good success with the universal tractor hydraulic/ transaxle fluid from tractor supply. I have over 1500 hours on the tractor now. W. Jones

If I sent you a gift certificate for a few beers at your local diner - would you be willing to scan and send me the complete shop manual for the 2535? I have some work that needs to be done to my 3-point and the shop manual would be helpful before I tear into it. I'm hoping that manual also has part # breakdown?

I have the owners manual, C-50 Loader manual, and an original sales brochure if you need any of those? I can scan and send in return...

- Q

 

[claggstractors]

Gotta say a scan of that brochure would be neat. Would have to dig my paper books up. https://drive.google.com/open?id=1NWHZrpUcdddkiiXAHFyyEcvYrGwLaUAa is correct in that area.

 

[Qcarritt]

Gotta say a scan of that brochure would be neat. Would have to dig my paper books up. https://drive.google.com/open?id=1NWHZrpUcdddkiiXAHFyyEcvYrGwLaUAa is correct in that area.

I'll scan the brocure and post a link.

The link you posted isn't working for me...

 

[claggstractors]

Sorry, this one should work. Checked the link itself this time.
10-20 Series service manual.pdf

 

[Qcarritt]

Sorry, this one should work. Checked the link itself this time.
10-20 Series service manual.pdf

Here is a link for the brochure: Century Tractor Sales Brochure.pdf

 

[EddieWalker]

I have the Century manual for a 2535 and the shop manual for it. Mine is a 2004 model. It is not bound so that it can be easily scanned, but if there is a particular section you need let me know and I will try to scan it. I have had good success with the universal tractor hydraulic/ transaxle fluid from tractor supply. I have over 1500 hours on the tractor now. W. Jones

By any chance does your manual have a part number for a 2003 Century 2535 starter?