houston burt
Member
trying to find some parts for a plow but dont know if it is jd or oliver no plate or markings on it that i can find any hints to figure out what it is
parts for plow
- Thread starter houston burt
- Start date
- Views: 1580
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,597
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
If you can post a picture, it may help. You don't say if it is an older, or newer plow... 3 pt., or pull type..??
There are usually part numbers on the back of the moldboard somewhere. You could always Google that number, and see what pops up.
There are usually part numbers on the back of the moldboard somewhere. You could always Google that number, and see what pops up.
OP
houston burt
Member
It is an older plow either john deere or oliver
oliver28472
Veteran Member
Lots of them around.
