Pat's Easy Change Service opinion

[GregH]

Had my Pat's for 3 yrs now. Great unit.

When you get ready to install, pay attention to the spacer thicknesses. When I got done installing mine, I looked at the two spacers left over--sure 'nough, they were different sizes, so I took the unit apart to install matching spacers.

Other thing to watch for: When roto-tilling, I went over a big clump, with the tiller deep. The PTO came apart! So be sure to check your PTO lengths after installing Pat's. There's not much excess in our CUTs, so a few inches is 'portant.

ron

I used the thicker spacer of the 2 but the spacer should have been about .100 thicker to actuall make the units run inline with the stabilizer bar.
Thanks for the reply
Greg