3-Point Hitch Pat's quick change

[Jofang]

I've read somewhere that there is a special version of Pat's quick change to suit the BX2350 due to the sharp turn at the ends of the lifting arms where the quick change units would fit. Any help or advice with the correct part number or description for these units so I can buy the correct ones first time would be very welcome.

 

[fried1765]

I've read somewhere that there is a special version of Pat's quick change to suit the BX2350 due to the sharp turn at the ends of the lifting arms where the quick change units would fit. Any help or advice with the correct part number or description for these units so I can buy the correct ones first time would be very welcome.

I cannot answer your specific question, but I can tell you that you will love the Pat's Easy Change hitch.

 

[skipperbrown]

I didn't put a Pat's on my bx, although I had one on my L and now my B. I never put one on the bx because the implements are light enough that I can manhandle them around to hook up (and I really can't do any serious manhandling with my 140#). That said, the Pat's is a great device, but be aware that it will shift your pivot point back about 3" and this could be significant with the light bx tractor.

 

[SLIMSHADIE]

I installed the Cat 1 version a few years ago, on my Bx25(basically a Bx2370). Looks like they have been redisgned a little now. Easy install and follow directions, I used supplied shims. Bought the stabilizer bar but now I dont need it. Easier hook up to implements, love it.