Pin for 3 pt hitch

[flingwing1969]

I'll bet one of these would do the trick too.

CountyLine Round Lock Pin, 3/8 in. x 2-1/4 in., Pack of 2, S175211 at Tractor Supply Co.

 

[flingwing1969]

. . . or, for $6
SpeeCo Steel Bent Hitch Pin 3 in. L 3/8 dia. in. | eBay

 

[David_Kb7uns]

My L3130 has something similar, got the box of Harbor Freight clevis pins and got a undersized washer and may of reamed it out a little but put pressed one washer on put it through the chain link and pressed another washer on the clevis pin and then you just need the hitch pin.

David

 

[countrybumpkin]

A bolt works good also

 

[flingwing1969]

You can also build your own subframe if you are so inclined. http://www.tractorbynet.com/forums/build-yourself/171760-how-build-your-own-custom.html?highlight=

 

[flingwing1969]

I think my post about a backhoe subframe was intended for another thread, sorry for that. Did you get your problem solved?