Pins in the jack stand ?

[FULLPULL]

I was using my loader today and a pin was on a dirt pile it matched the pin on the jack stand for the loader . I am asking i only have one in the jack with a hair pull pin now . Has anyone removed the 270tl loader and does it take two pins to hold the jack stand?

 

[daTeacha]

Your manual should show you how to stand the leg out for the loader when you take it off and what to do with the pins. I take the 14 series loader off mine only rarely. Last time I did it, I thought it was a little tricky. Only when I put it back on did I notice that I had forgotten to extend the leg! Still worked out okay, just took a little more diddling around.

 

[Ford850]

I have a DX55, with the newly named LX360 loader. My jack stand consists of 2 legs that each have a pin to secure them, one on the left and one on the right side of the loader. Each pin is held in place with the 'hairpin' as you described.

 

[FULLPULL]

On my 16la there was only 1 jack stand that folded out. I looked closer today and found i have 2 stands as you said and one of the pins was missing so its fixed. Thanks