JohnnyDark
Bronze Member
i'm thinking about a cat 0 hitch for my cub. anyone out there built one? plans, links , any and all help will be greatly appreciated. thanks Johnny
plans for a cat 0 3 point hitch ?????
- Thread starter JohnnyDark
- Start date
- Views: 11536
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Take a look at this site and then scroll to the bottom of the page. Specs for all hitch types are given. Be warned the the height of the top link tower for Cat 0 is not specified and must be sized to your particular tractor.
3pt hitch types
3pt hitch types
Kaliburz
Gold Member
Depending on the year of your Cub (be it new or old), it may have/had a 3pt available.
If not, a local tractor place might be able to get you ends to weld on (cat 0, 5/8") and a center link.
If not, try here: Johnny Products Cat 0 Stuff Scroll down all the way to the bottom on the right window and it'll start listing what parts they sell for Cat 0 ....
Hope this helps. (I plan to build one for a Jac/Homelite GT12H I have...)
If not, a local tractor place might be able to get you ends to weld on (cat 0, 5/8") and a center link.
If not, try here: Johnny Products Cat 0 Stuff Scroll down all the way to the bottom on the right window and it'll start listing what parts they sell for Cat 0 ....
Hope this helps. (I plan to build one for a Jac/Homelite GT12H I have...)