Plumbing a valve w/Pwr BYD on splitter

Thread starter mgtd
Start date Feb 27, 2009
Views: 10780

Mar 26, 2009 / Plumbing a valve w/Pwr BYD on splitter

#11

TTTTTT

Gold Member

Thought it might br confusing. A while back it was suggested that at that QC, I could plumb my FEL valve between the male & female of the QC. (I assume thats why the QC was there). Right now the FEl valve is plumbed off the rear remote. By disconnecting at the QC, I could go off the pump to the in of the FEL valve and the out from the valve to the remaining part of the QC completing the circut.

Dave