Power steering assist? 400 or 950 using AM33449

[project_X]

I am looking at fabbing power assist for my Yanmar using the valve from a 400 lawn tractor or 950 (AM35449). I can see parts of the assembly of the valve and cylinder on JDparts, but could not find exactly how they fit on the tractor.

Does anyone have pictures of the power assist on either of these machines?


Thanks,
Rob

 

[project_X]

For example, in the following diagram:

Where does the end (part 13) connect to the tractor?

 

[atschirner]

If item #20 is the control valve would #13 anchor to the frame?