As I wait for delivery of my new GC2400L, my thoughts turn to offering my old Case 222 garden tractor up for someone else to enjoy. My hope is that you guys can help me know what it's value is so I know how much to list it for. I am not looking to get rich off of it, just want to be sure I know what a fair deal would be. To complicate things, the dealer that I was working with to acquire the parts I needed to rebuild the engine told me that the tiller itself was worth considerably more than the tractor. I guess these units are hard to find. About 2 years ago I got frisky over the winter and tore the whole thing down, cleaned everything up and replaced the piston, valves, seals, etc in the 12hp kohler (k301 I think?). I also purchased a brand new starter and battery for the unit. It is a very strong running unit, hydraulic oil does tend to overheat if I run the tiller for to long (hour or so). I will usually till for about 30 minutes then let it rest for an hour or so before I run it again. It is quite a package deal I have to offer.
Case 222
model 222-76
Serial 9723458
MMM deck
Tiller
Model J-70 76
Serial M 41945
Case 222 spare parts machine.
Model 222
Serial 9781663
MMM
I have complete service manual and parts list on PDF and printed out. I also have several spare parts that I bought on eBay while I was bored. I have a hitch plate that I fabricated that fits on the lift bar in the back I use for pulling roller or trailer. The motor on the tiller probably needs the seals replaced. It has the extension on it that makes it a 42". Hoping this is enough information for you guys to help me out
Thanks
Case 222
model 222-76
Serial 9723458
MMM deck
Tiller
Model J-70 76
Serial M 41945
Case 222 spare parts machine.
Model 222
Serial 9781663
MMM
I have complete service manual and parts list on PDF and printed out. I also have several spare parts that I bought on eBay while I was bored. I have a hitch plate that I fabricated that fits on the lift bar in the back I use for pulling roller or trailer. The motor on the tiller probably needs the seals replaced. It has the extension on it that makes it a 42". Hoping this is enough information for you guys to help me out
Thanks
Attachments
-
DSC00120.JPG577.7 KB · Views: 551
-
DSC00121.JPG566.3 KB · Views: 3,116
-
DSC00123.JPG543.5 KB · Views: 1,133
-
DSC00124.JPG567.5 KB · Views: 525
-
DSC00125.JPG560.6 KB · Views: 1,056
-
DSC00127.JPG591.1 KB · Views: 814
-
DSC00128.JPG588.4 KB · Views: 657
-
DSC00129.JPG578 KB · Views: 345
-
DSC00131.JPG556 KB · Views: 269
-
DSC00133.JPG558.8 KB · Views: 300