Problem with Massey 1433

[JimWolf]

I have a MF 1433 and the bolts from frame to engine keep coming lose. We have tried red Loctite with no success. Any suggestions? I would also like to know whether this make and model have been having this problem in general.
Thanks.
Jim

 

[Dave M7040]

How about a picture.
A bolt hole which has worn oversize from being loose is not going to have a bolt stay tight no mater how much loctitie you use.
You may have to re-drill the holes and fit a slightly larger bolt that is snug in the hole. When trying to find slightly larger dont forget to consider metric.
Same problem occurs on vehicles. If a wheel comes loose the hole on the wheel will be worn slightly larger and the tapered surface the nut seats against is no longer a perfect circle.
The wheel will continue to come loose no matter how tight you make it. A new wheel is the only answer.
Dave M7040