Problem with NH loader joystick

   / Problem with NH loader joystick #1  

paulw

New member
Joined
Dec 21, 2001
Messages
18
Location
Mooresville, NC area
Tractor
NH TN65 FEL+4x4 and IH 364 (does any body have one of these other than me)
I have a problem with my TN65 NH loader. The joystick control mechanism to tip and roll back the bucket seams to be disconnected. The ball joint appears to be operating OK and the rod that it works moves with the stick but it does work the hydraulic valve. I don’t have a service or parts manual so I don’t want to start taking it apart. In addition, with only 25 hours on the new tractor it should be covered by warranty. The dealer said to bring it into the shop but I don’t have a trailer large enough to haul it and they can’t pick it up as their truck is out of order for a week or so.

It seams like it must be something simple that needs to be reattached. Has anyone experienced a problem with the NH joystick loader control?
 
   / Problem with NH loader joystick
  • Thread Starter
#2  
Sorry I posted this in under the wrong forum topic. I'll post this in the NH section.
 

Tractor & Equipment Auctions

UNUSED INDUSTRIAS AMERICA L5 HYD LAND LEVELER (A50459)
UNUSED INDUSTRIAS...
2018 CATERPILLAR 262D WHEELED SKID STEER (A50458)
2018 CATERPILLAR...
2009 Lee-Boy 8510HD Conveyer Feed paver (A50397)
2009 Lee-Boy...
JOHN DEERE 2640 TRACTOR (A50459)
JOHN DEERE 2640...
20Yd Roll-Off Container Dumpster (A49346)
20Yd Roll-Off...
2023 MECALAC AS600 WHEEL LOADER (A50458)
2023 MECALAC AS600...
 
Top