proportional solenoids 4310

[chickenman]

where are the located under the tractor?

 

[RogerH]

Your tractor probably has a 1 foot squarish metal cover in the middle underneath. Remove that cover and you will be able to see them sticking forward from the HST. One is low and accessible. The other is a little higher to one side. Not sure how serviceable that one is.

 

[chickenman]

Your tractor probably has a 1 foot squarish metal cover in the middle underneath. Remove that cover and you will be able to see them sticking forward from the HST. One is low and accessible. The other is a little higher to one side. Not sure how serviceable that one is.

thanks

 

[chickenman]

I took my meter and checked voltages while I did a calibration of the drive controller as i was afraid it's a bad controller