Protecting new driveway from damage
- Thread starter broomjob
- Start date
- Views: 629
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
Do a search for some tips on this.
Some folks have used a "cow mat" attached like a squeegee to the bottom of the blade. Buy the cow mat at TSC.
I just had my driveway done in the spring. It isn't as hard as it was. So, I plan to either attach a heater hose to the leading edge of my FEL by slitting the hose and gooping it in place or buying a BB and putting a cow mat onto it. Haven't figured out yet which (or both maybe). Plan to go to the dealer to get a MacKissic shredder and will price a BB.
Ralph
Some folks have used a "cow mat" attached like a squeegee to the bottom of the blade. Buy the cow mat at TSC.
I just had my driveway done in the spring. It isn't as hard as it was. So, I plan to either attach a heater hose to the leading edge of my FEL by slitting the hose and gooping it in place or buying a BB and putting a cow mat onto it. Haven't figured out yet which (or both maybe). Plan to go to the dealer to get a MacKissic shredder and will price a BB.
Ralph
odleefs
Gold Member
- Joined
- Jun 18, 2005
- Messages
- 302
- Location
- Northeastern PA
- Tractor
- 2005 Bobcat/Toolcat 5600T C, 2000 Yamaha Grizzly
Urethane cutting edge information
Here is a website for urethane cutting edges, as used at airports. Hope this helps.
Steve
Here is a website for urethane cutting edges, as used at airports. Hope this helps.
Steve
