Mowing PTO fuse blows - Brandon 4220i

   / PTO fuse blows - Brandon 4220i #1  

viejoloco

New member
Joined
Sep 7, 2014
Messages
2
Location
Sunset, Tx
Tractor
Brandon 4220i
We were mowing Saturday and all the sudden the PTO light went out and quit working.
We found the fuse blown and replaced it. The turn on the tractor again and went to turn o. PTO and nothing, check fuse and it was blown. So replace it with switch off but tractor on and it blue on our hands.

Could it be the solenoid is in short ?

Any ideas?

It is my first post so I hope it is in the right place.
 
   / PTO fuse blows - Brandon 4220i #2  
I don't know anything about brandon's,but if your a "do-it- yourselfer",
try and remove the the solenoid and put another fuse in, if it still blows, it's not the solenoid.
Could be a broken wire grounding out from or to the solenoid.
 
   / PTO fuse blows - Brandon 4220i
  • Thread Starter
#3  
Thanks, Solenoid was our first thought too. Tractor has less than 200 hrs.

Anybody has the wiring diagram? or idea where the Solenoid is located?

Thanks Skyhook
 
   / PTO fuse blows - Brandon 4220i #4  
I would suspect a wire shorting out Vs a bad coil. PTO solenoid should be on the side of the transmission housing. I believe Branson has an on-line parts diagram website.
 

Tractor & Equipment Auctions

2014 INTERNATIONAL 7400 SBA 42 LUBE TRUCK (A51406)
2014 INTERNATIONAL...
2007 Reitnouer 40 Ton T/A Flatbed Trailer (A49461)
2007 Reitnouer 40...
Rhino 156 Chisel Plow - NO RESERVE SELLING ABSOLUTE (A51039)
Rhino 156 Chisel...
2-Row Peanut Inverter (Chain Drive, PTO, 3-Point Hitch) (A51039)
2-Row Peanut...
2021 Doyle 8 Ton Trailer Tender (A51039)
2021 Doyle 8 Ton...
2021 John Deere 333G Compact Track Loader, 390 Hours, High Flow Hydraulics, Ride Control (A51039)
2021 John Deere...
 
Top