I recently acquired a 1959 Ford 1801 series industrial tractor. Serial No 97657. It has a front loader and 3 point hitch and Select O Speed transmission. I would like to know if it is possible to add a PTO output and if the parts can be located. Thanks for any help. C, Mcgraw
PTO Information
- Thread starter c mcgraw
- Start date
- Views: 1118
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
is the pto shifter stuff even installed? might be a trans change out to another 871 or 881 if you had a 871 or 881 that had a blown engine it might be the cheapest way to go..
soundguy
soundguy