Pulled the trigger on 2520 today....

   / Pulled the trigger on 2520 today.... #1  

Ed G

New member
Joined
Oct 27, 2009
Messages
9
Location
Northeast PA
Tractor
(Soon to be) 2520, 200cx, 46 BH, 727A ZTM, Gator, LX279
Well, the used 2520 I was looking at was sold out from under me, and - after some lengthly soul-searching an web-surfing (especially here on TBN) - I finally decided on a BRAND SPANKIN' NEW 2520.....I just got home from my local JD dealer where I put a deposit on a 2520, 200cx w/61" and 46 BH w/16" ....I am very, very excited (with the occasion bout of buyers remorse)!! :D

So, now the wait for confirmation of when everything will be delivered - dealer estimates 2.5 weeks...ANTICIPATION!! :eek:

QUESTION: I am contemplating having the rear wheels filled (I have a pretty hilly property)...dealer has quoted me $300 for both tires w/Calcium Chloride to include the tubes - any thoughts, suggestions or concerns on this?
 
   / Pulled the trigger on 2520 today.... #2  
Congratulations!!! Wow, how great is that?

Calcium Chloride? Naw, don't put that stuff in there. Sorry to be so blunt. Ask a hundred guys and get a hundred opinions, but I'd put beet juice if I was going to do anything.

BTW, we will want pix! :D:D
 
   / Pulled the trigger on 2520 today.... #3  
I would suggest that you try to get some version of Rim Guard, or windshield washer fluid, etc. to load the tires with. I've seen far too many used tractors with rusted rims from the CC.
 
   / Pulled the trigger on 2520 today....
  • Thread Starter
#4  
Yes, yes - pictures are a must, I understand ;)

Thanks for the quick feedback on the CC....
 
   / Pulled the trigger on 2520 today.... #5  
I used RV antifreeze that goes in the water pipes from autozone. Want hurt the environment and its 2.50 a gallon. Used about 6 gallons per rear tire.
 
   / Pulled the trigger on 2520 today.... #6  
Congrats. I'll suggest that you look into getting RimGuard as well, it can't be beat for a tire ballast. Calcium chloride, even in tubes, is just too damaging to be run in a tire for ballast. We had CC in the rear tires on an IH 340, which caused noticeable damage to the wheels, but thankfully not enough to make them un-usable.

Good luck with your new machine.:cool:
 
   / Pulled the trigger on 2520 today.... #7  
as wh401 said rim guard may not be as heavy but is it less damaging and cheaper was helping a friend move brush and he drove forward and popped the valve off and out comes shooting calcium chloride asked him how much to fix and refill the tires he said 1000$ not sure if it really cost that much or not
 
   / Pulled the trigger on 2520 today.... #8  
You will LOVE the 2520, especially because noone has molested it!
 
   / Pulled the trigger on 2520 today.... #9  
Enjoy the new tractor and be careful on those hills.


Steve
 
   / Pulled the trigger on 2520 today.... #10  
Well, the used 2520 I was looking at was sold out from under me, and - after some lengthly soul-searching an web-surfing (especially here on TBN) - I finally decided on a BRAND SPANKIN' NEW 2520.....I just got home from my local JD dealer where I put a deposit on a 2520, 200cx w/61" and 46 BH w/16" ....I am very, very excited (with the occasion bout of buyers remorse)!! :D

So, now the wait for confirmation of when everything will be delivered - dealer estimates 2.5 weeks...ANTICIPATION!! :eek:

Congratulations! I am looking for a similar set up, how much off list were you able to get?
 

Tractor & Equipment Auctions

1991 Cleveland Equipment Trailer (A50514)
1991 Cleveland...
2019 BOBCAT S770 SKID STEER (A51242)
2019 BOBCAT S770...
EVERYTHING SOLD AS-IS WHERE IS!! (A50775)
EVERYTHING SOLD...
Brent 420 Grain Cart (A50514)
Brent 420 Grain...
2000 CATERPILLAR 140H MOTOR GRADER (A51406)
2000 CATERPILLAR...
Payment Terms (MUST READ) (A50774)
Payment Terms...
 
Top