Question about the Andy Tatro grapple

[Chuck K.]

As much as I would like to try and fabricate a grapple myself lack of time and availability of metal supply near me has leaning toward a ready to bolt on kit. Is the Andy Tatro grapple available in a turn key kit with everything inclusive? If so can you get it with the rocker switch in the FEL joystick knob? Thanks for any help.. Chuck.

 

[kennyd]

The Tatro grapple will come with the cylinder, but no means to control it.

Give WR Long a cal, they have a kit for about $500.00 that will control your new grapple.

 

[dtd24]

You can also use a diverter valve!! A lot cheaper that wr long setup

http://www.tractorbynet.com/forums/customization/94277-grapple-design.html

This thread goes through it all

 

[3RRL]

What Kenny said.
The Andy Tatro grapple comes complete with hydraulic cylinder, pins, and mounting plate ready to weld to your bucket. You can add bolt holes to the mounting plate if you prefer that. But you'll have to supply the valve controls (whichever you choose) and hoses. Then connect that all up.

 

[GuglioLS]

Chuck,
Below are links for a Joystick Handle with switch -
I used the S series on My Grapple Project

Home Page
S series handle
Handle specs
Mounting options
Parts List

They are in Canada with a direct dial toll free #

I told them I would try to get them some business - So Please, If anyone orders a handle let them know that Larry Gugliotta referred you. Maybe good for a discount? - Ask!
If you really do order one, let me know so I can get an Idea of how much business they may be getting from us.

Be sure to check out & order the correct mount, & order enough cable for your application, they come standard with 2 feet of cable.

These are durable, high quality handles that you can get parts for if needed - so expect to pay about ~ 130.00 USD + shipping. For me, it was worth every penny. As opposed to fabricating some makeshift setup I would not be happy with.

Larry

 

[Chuck K.]

Thanks for the replies folks... What is the best way to contact Andy? I found an email address and requested information from him but have not recieved a reply yet, this has been over a week ago...