Questions on 3rd, 4th, 5th SCV

Gary_in_Indiana · Oct 29, 2004

It appears I need to add the 3rd, 4th & 5th SCV setup to my 4200 and was hoping someone here either had or could take some pictures of theirs and post them for me. I'm interested in the new connections at the rear and the new controls.

Can any of you help me out? Thanks. /forums/images/graemlins/smile.gif

gcrabb · Oct 30, 2004

Gary,

I have the 3rd SCV on a 4600, if interested I can take a picture of that.

The 4th and 5th require the power beyond option which I do not have.

Greg

Gary_in_Indiana · Oct 30, 2004

Thanks, Greg. That would be great.

I can't believe that through over 100 views of this that no one has the third, fourth & fifth SCV's they could shoot and post here.

4710and110TLB · Oct 30, 2004

I have no pics of my 3,4,5 remotes on the 4710 but we did it ourselves by adding single diverter valves to the third remote already one there. it was fairly cheap and easy to do. My 110 has the 345 remotes but it is totally different than that of the green tractors. Might be the same valve body though?

chevy · Oct 30, 2004

Could you give some detail on how you connected the remotes to the 3rd remote?

4710and110TLB · Oct 31, 2004

You have to connect to the lines prior to the remote with a couple of T's and then run them to the single spool diverters and buy some more quick connects and just hook everything else up. You will have $250 in it this way with some labor but far under deeres price. Its hard to explain kinda.

gcrabb · Nov 1, 2004

Gary,

I am out of town until next week, when I get home I will post them.

Greg

Gary_in_Indiana · Nov 1, 2004

It sounds like the first thing I would have to do would be to add the third SCV at the rear of my Deere. I'll assume that the price my dealer gave me for that is the best I can do on that. It was $300. If I add to that the $250 you mention then I'm really ahead of the game.

Of course, with the Deere set up I get three separate controllers integrated into the right side armrest (and lose my cup holder). Am I right in understanding the $250 you mentioned includes controllers as well or am I missing something?

Also, is there any way you can take some pictures of yours for me? I think it would really help me out with this. Thanks.