Tarnold
Silver Member
Will a AG series((ISO 5675)round ball nipple) QC, mate to a 600 series ((ISO 7241) cone shaped nipple) QC? Naturally same size.
Quick coupler question
- Thread starter Tarnold
- Start date
- Views: 1072
Discount Hydraulic Hose
Silver Member, Advertiser
ISO 5675 (Ag Couplers) and ISO 7241 Series B are the same body shape only in the 1/2" body size. All other sizes are different.
As far as mixing ball types with poppet types, manufacturers recommend against it. Some end users have done it without a problem, but there is potential for leaking whenever you mix coupler types. These couplers are very inexpensive, so why not just buy a few more pieces and make sure all of your attachments match?
As far as mixing ball types with poppet types, manufacturers recommend against it. Some end users have done it without a problem, but there is potential for leaking whenever you mix coupler types. These couplers are very inexpensive, so why not just buy a few more pieces and make sure all of your attachments match?
IceStationZebra
Gold Member
You didn't mention the application, but it's possilbe that one will not be fully open and create some extra pressure drop with high flow attachments.
ISZ
ISZ
