Coldwater
Advertiser
i have a set of new R4 tires and rims for a jinma 284 $1000 hoquiam wa
r4 tires
- Thread starter Coldwater
- Start date
- Views: 2087
cleat
Silver Member
What size would they be ?
Bob Rooks
Elite Member
Set of rears or set of fronts, or a complete set consisting of fronts and rears?
I talked to a dealer in TX about a set of (4) R4 tires and rims for my 254 Jinma which I believe is the same as 284 and he said that it requires a set
of adapters for the front wheels so the tires won't rub against the tractor during tight turning. He said he was sold out and didn't know if he would be getting any more. If this is the case how much $$$ are the adapters? Will the
R4 set of tires fit on the narrow stock AG rims?
of adapters for the front wheels so the tires won't rub against the tractor during tight turning. He said he was sold out and didn't know if he would be getting any more. If this is the case how much $$$ are the adapters? Will the
R4 set of tires fit on the narrow stock AG rims?
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
Any competent machine shop can fabricate wheel spacers. And no; if you want the same overall height, you won't get R4s on R1 rims
//greg//
//greg//
greg_g
Super Member
- Joined
- Dec 18, 2003
- Messages
- 6,126
- Location
- Western Kentucky
- Tractor
- JD3720 Cab, 300X loader with 4-in-1 bucket
Don't know what that's got to do with R4s on R1 rims, and I don't have a clue about MF. But my own John Deere was made down in Georgia earlier this year. The Yanmar engine came from Japan, but it was ultimately mated with the rest of the tractor at the Augusta (GA) plant.
That said, John Deere does have one or more manufacturing plants in China. But their output is for sale to the Asian market.
//greg//
