Racor 120AT fuel filter install on a Yanmar YM2000

[California]

Next up is a bracket to hold the clutch pedal down during storage. Yes a block of wood would work but if I have a bracket permanently attached to the tractor I will never lose it. I want it to be easy to do so I will do it every time I park it in the garage.

Here's a photo and explanation of the OEM hold-down lever. It should be easy to duplicate.
http://www.tractorbynet.com/forums/yanmar/375536-green-vs-red-yanmar-1500d-2.html#post4700246

 

[clemsonfor]

Thats a pretty hidden shot of it on that pic of mine that JT posted. Its the one with the fender and wheel removed.

I probably have a better one. I need to look back through from when i did that brake shaft seal, resurfaced the drum and did the rear wheel seal.