BuilderML
Gold Member
Was wondering how much weight others might be using for rear ballast on a SX3100?
Rear Ballast SX3100
- Thread starter BuilderML
- Start date
- Views: 1141
George2615
Super Member
Your rear lift is rated for 1209 lb. per tractordata.com
If you just need some rear ballast for doing loader work 400-600 lb. should work very well.
If you just need some rear ballast for doing loader work 400-600 lb. should work very well.
scoutcub
Veteran Member
- Joined
- Aug 19, 2008
- Messages
- 2,286
- Location
- Ohio
- Tractor
- Yanmar LX4900//Cub 7532//Cub Yanmar SC2400//Komatsu D38//Cub Volunteer//Cub SZ60/CAT 289C/CAT 308
I like to balance the loader capacity with the rear ballast. My lx4900 lifts 2500, I have rear tires loaded which adds 1100, and have a 1500 lb box blade. Loading the rear tires really helps, and is always there.
dslanec
Silver Member
I have loaded tires and I hook up my box blade when I so loader work. It is only a 4' blade and weighs about 250 pounds. It works good unless I have a full bucket of dirt and have to go down hill. The rear tires get a little lite for my taste. I have also strapped 4 cement blocks on my blade and it makes it much safer. So with loaded tires I would say at least 400# and you should be good.
Sent from my iPhone using TractorByNet
Sent from my iPhone using TractorByNet
