galen1115
Member
Does anyone know where I could download the instructions to install the kit for rear hydraulics on a TC 33? I can't find the instructions but can find the kit and picture of the parts. Thanks.
Rear Hydraulics
- Thread starter galen1115
- Start date
- Views: 2648
SevernDH
Member
Not sure where to download them. However, I do have the instructions on hand for the first remote for a TC40DA, which MAY be similar.
You might try asking your local dealer to see if they can copy the instructions out of a kit for you (there is a decent chance they stock the kit, since they fit several models).
If you want to try this set, send me a PM with your address, and I will try to get a copy made and shipped off, though it may take me a few days.
You might try asking your local dealer to see if they can copy the instructions out of a kit for you (there is a decent chance they stock the kit, since they fit several models).
If you want to try this set, send me a PM with your address, and I will try to get a copy made and shipped off, though it may take me a few days.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
While there are a few similarities between the Class II and Class III tractors, I think the kind of 'fine point' details you need will not be there in the Class III instructions. I have all of those for all 3 of the Class III remotes and the lever installation and routing of the plumbing to the rear quick-connects is different. I didn't offer because surely somebody has installed the remotes on a Class II tractor and will see this thread eventually and offer to help. I think a lot of people don't log into TBN on the weekends and you are likely to have help maybe during a weekday. If not, I'll be glad to help also if you don't get specific instructions.
BTW: When you buy the kit, it comes with instructions already punched so you can put them in a binder with your Operator Manual.
BTW: When you buy the kit, it comes with instructions already punched so you can put them in a binder with your Operator Manual.
MikePA
Super Moderator
Click Here for a thread that describes the installation, with pictures. I recalled someone documented this a long time ago but couldn't recall who. So, I searched the NH O/O forum for 'remotes'. JohnInCA has not posted for almost 5 years. Since the dealer installed both of mine, I don't have the instructions. 
MikePA
Super Moderator
I found his thread in my search, although I didn't look at it since it was for a Class III. There might be pictures and instructions in it. Click Here for the thread. Click Here for the documentation on Pineridge's website.
jinman
Rest in Peace
- Joined
- Feb 23, 2001
- Messages
- 20,387
- Location
- Texas - Wise County - Sunset
- Tractor
- NHTC45D, NH LB75B, Ford Jubilee
Mike that's a super photo how-to by John_in_CA. You did a good job of finding it. It's probably gonna make some folks sick when they see the prices paid for this stuff in 2001. Two remotes and toplink and tilt cylinders plus all hoses for just $1000. There's going to be some folks salivating over that one.:drool:
MikePA
Super Moderator
Oh wow, Thanks for showing me the post. I'm new here and need to learn how to use the search feature. I was up all night last night. At 4:38 this morning I became a new grandfather. His name is Hunter Lane. 7.3lbs. both are perfect. I'm so proud!
Congrats on the little one!
jinman - You're right about price envy. I considered myself lucky when I got both rear remotes (maximum for a Class II) plus installation for under $1,000 several years ago.