rebuild a f1145 from the junk yard

[bob2449]

.ok every thing is working cant belive it.so I put lotes of paint .it did not have a set . got buckit seat heated on less elc. up and down o yes must have mirrors elc. and headed must have a horn. wipers, washers,new tires,must have doors sliding windows,o don't forget the stereo four speakers, and the amp, snow plow, snow blower, power shute up an down, must have hot water heat on the ceiling nice an toste,rear hoses for power dump,new head lights tail lights turn signals four ways all leds, step to get in and out, now after all that I had to build a new power system to work all this stuff lots of fun. well every thing works . got it done about 3 weeks a go. had lots of fun

 

[Richard001]

Bob,

Looks like you had some fun and a learning experience at the same time. Looks good.

Richard

 

[bob2449]

takes a lot of time to make it right so every thing works. thanks for coming back

 

[Kish318420]

Nice rebuild! Looks good, I'm sure it will give you excellent service!

 

[jenkinsph]

Looks good, hope you have fun with it.:thumbsup:

 

[LRover]

The F1145 is a great machine. Looks like you did a nice job on the rebuild, congrats! Used a couple of these in a commercial situation for about 20 years with several different attachments. I retired but as far as I know they are still going strong!

 

[GyW]

A school near here had one of those, well until one of the worker's drove it right off a loading dock, it took a 8 foot drop! Twisted the roll cage and the frame, they junked it. The roll cage surely saved the guy from being hurt more then some bruise's, that and a new pair of shorts!