removal of swing cylinders on Deere 48 backhoe

   / removal of swing cylinders on Deere 48 backhoe #1  

Radical Rob

New member
Joined
Jan 23, 2024
Messages
3
Tractor
5105 john deere
Has anyone removed swing cylinder on a deere 48 backhoe without removing the hoe? I am considering removing the plate below the hydraulic valve pack in order to facilitate removing the cylinders so I can replace the hydraulic lines. I can see no other way to remove the two lines side by side on the outboard side of the cylinders without removing them. Looks like clearance between the valve pack and the cyl. pin is adequate to remove the plate.
 
   / removal of swing cylinders on Deere 48 backhoe #2  
That would be the simplest way that I can see.
 
   / removal of swing cylinders on Deere 48 backhoe #3  
I took the swing cylinders off my 310E without removing the hoe. Was a little tight in some places and I remember pounding the giant bracket in a little, but it fit
 

Tractor & Equipment Auctions

2017 GMC SIERRA 1500 (A53843)
2017 GMC SIERRA...
2021 JOHN DEERE HX14 LOT NUMBER 14 (A53084)
2021 JOHN DEERE...
2025 Swict 72in Bucket Skid Steer Attachment (A53421)
2025 Swict 72in...
2004 Fleetwood Wilderness Advantage 365 BSQS 38FT T/A 5th Wheel Travel Trailer (A53424)
2004 Fleetwood...
2023 FORD TRANSIT VAN (A52576)
2023 FORD TRANSIT...
2016 Nissan Frontier Ext. Cab Pick-up (A53422)
2016 Nissan...
 
Top