Removing a JD 80 FEL from a 1070

   / Removing a JD 80 FEL from a 1070 #1  

gregfender

Gold Member
Joined
Jan 11, 2011
Messages
363
Location
Marion, NC
Tractor
Kubota L2501 HST
Could anyone tell me how it's done? I know it is supposed to be simple, but I was just curious the steps. I think I am going to take mine off to do some field work.
 
   / Removing a JD 80 FEL from a 1070 #2  
Prepare to Remove Loader:1. Level bucket and lower to ground.
2. Retract lift cylinders and relieve weight from front tires.

Remove loader:1. Release latch and pull out to maximum position. Repeat for the other side.
2. Extend lift cylinders. Masts will lift out of rear frames.
3. Raise masts high enough to clear front tires.
4. Apply parking brake and shut off engine.
5. Move control lever(s) back and forth a few times to relieve system pressure.
6. Disconnect hoses at couplers and install dust plugs.

To avoid hose damage, be sure hoses do not catch on tractor when reversing away from loader.
8. Slowly back away from loader.
 

Tractor & Equipment Auctions

2016 Dodge Charger SRT Hellcat Sedan (A55758)
2016 Dodge Charger...
2014 Ford F-150 Ext. Cab Pickup Truck (A55788)
2014 Ford F-150...
2017 Ford F-150 Pickup Truck (A53422)
2017 Ford F-150...
2011 CIRCLE M 32 FOOT GOOSENECK (A53843)
2011 CIRCLE M 32...
2002 WESTERN STAR 4900 EX TANDEM AXLE SLEEPER TRUCK (A54313)
2002 WESTERN STAR...
2016 Ford Fusion SE AWD Sedan (A53424)
2016 Ford Fusion...
 
Top