Repair manuals on CD

[guyw]

I just checked the NH Web site and the TC-18 repair manuals
on CD are now in stock. Two questions - does anyone have
any feedback on using the CD version of the manuals? Second
and more important question, the site lists two different part
numbers of the CD. I assume there is one for Serial Numbers
under UD33666 (my tractor) and one for Serial Numbers over
UD33666. There is no description I can find to tell me which is
which. Can anyone tell me if I want the 87012847-CD or the
86590938-CD? Thanks!

 

[thcri]

I would like the CD for my TC29D. Using the CD allows you to print off the pages you need for the job your doing. A book you use as you go along and you end up getting it pretty dirty. But it was my understanding the prices were way up there?

murph

 

[guyw]

The TC-18 manuals on CD are listed at $75. Hardcopy alone
is $280. The TC-29D CD looks to be $75 as well, but the
TC-29DA CD looks to be $230.

 

[Gumby6]

Ok, I give up...

I can't find any information on the NH site regarding repair manuals on CD.

Anyone have a link to share?

Thanks in advance.

 

[guyw]

The manuals site is:

https://www.newhollandtechpubs.com/

Do a search for the model number you are looking for.

Guy.

 

[guyw]

Just ordered my TC18 manuals on CD. There are two different part numbers shown. I had to call the Customer Service number to find out which part number was for my tractor. The very helpful lady didn't know either and had to email someone to find out and then called me back with the info. There is one part number for serial numbers UD33666 and above and one for serial numbers less than that.

under UD33666 - 86590938-CD
UD33666 & above - 87012847-CD

Either one costs $75 each. I am guessing here, but it looks like that the CD for tractors that are no longer being manufactured are in the $75 range, while the CD for tractors that are current seem to be a lot more - more like $275 and up. I will post again when I get the CD with a review.

Guy.