Repairing leaking hydraulic hardline @ junction

   / Repairing leaking hydraulic hardline @ junction #1  

MogginMike

New member
Joined
May 29, 2009
Messages
23
I have a loader with a hardline that got tweaked before I owned it. It leaks, and recently got worse. It is between a manifold & a hardline, and the hardline has several 90 bends to the next junction.

Is there any good way to disconnect & re-seal it? It now no longer goes in square, and I don't think I can bend the line by hand.


-mike
 
   / Repairing leaking hydraulic hardline @ junction #2  
Is it at a brazed/welded connection? Can you post a picture of it?
 
   / Repairing leaking hydraulic hardline @ junction
  • Thread Starter
#3  
Too dark now, I'll grab a photo in the morning. Looks like a compression fitting, I can only speculate flared.

-mike
 

Tractor & Equipment Auctions

16ft T/A Flatbed Trailer (A55758)
16ft T/A Flatbed...
2003 Lincoln LS (A50324)
2003 Lincoln LS...
2023 John Deere 9RX 640 Track Tractor (A53485)
2023 John Deere...
197711 (A51244)
197711 (A51244)
2013 PETERBILT 388 MID-ROOF SLEEPER (A52472)
2013 PETERBILT 388...
24" PIN ON BUCKET (A52707)
24" PIN ON BUCKET...
 
Top