TMTS
Silver Member
- Joined
- Nov 17, 2007
- Messages
- 110
- Location
- New Hampshire
- Tractor
- ASV 4810, JD 540 skidder, Barko loader
looking for advice on what I should look for as I attempt to restart my mid-sized rollback truck I use for moving equipment. It's a 1999 GMC T7500 (cabover) with a CAT 3126 engine. It has a 26ft Jerr-Dan Rollback on it.
The truck has been sitting for close to a year- was moved once or twice in the yard, but never out on the road (insurance was off)
I will give it a look-see to see if any rodents have taken up residence- and charge the batteries- BUT-
other suggestions- remove/filter the fuel? oil seals on the axels? (has an Eaton transmission and rear end) Tires? other things to check/lube/replace?
thanks-
TMTS
The truck has been sitting for close to a year- was moved once or twice in the yard, but never out on the road (insurance was off)
I will give it a look-see to see if any rodents have taken up residence- and charge the batteries- BUT-
other suggestions- remove/filter the fuel? oil seals on the axels? (has an Eaton transmission and rear end) Tires? other things to check/lube/replace?
thanks-
TMTS
