Tires Reverse front tires for B7800

[Leejohn]

I cut the centers out and put them in the middle of the wheel. I used a 4 1/2" grinder and a gie grinder to cut the center loose then welded back in. The wheels should be the same, someone has changed one.

 

[Daddy Stew]

Leejohn, thanks for the reply! You're exactly correct. Either the PO gave me a "gift" or he bought it this way, but one wheel is a 12" rim and the other a 14" rim, thus the reason they are different and one won't reverse. I guess I will swing by my Kubota dealer and see if I can do a swap of a rim/tire to get them to match.