I am going to change the fuel and hydraulic filters on my 3220D. Does anyone know of a website where I can access the correct procedures to accomplish this?
I am going to change the fuel and hydraulic filters on my 3220D. Does anyone know of a website where I can access the correct procedures to accomplish this?
Here is a good one on fuel filter. Yanmar Tractor Fuel Filter Change
Don't know of a similar on hydraulics. Not familiar with the 3220 but I would assume it has a screen, most likely found behind a 3 bolt flange low down on the transmission someplace. You will need to remove drain plug or plugs and drain fluid. No idea how much a 3220 holds. I would expect at least 5 gallons so be ready with pans, buckets or whatever. I believe you also have a spin on hydraulic filter that will need to be changed. Watch the condition of the fluid and screen, if real bad you might want to rinse out a little with a cheaper fluid. You will want to refill with Fluid & Oil Types Hope this helps you some. Maybe someone with direct knowledge of a 3220 will come along.