Running out of patience

   / Running out of patience #1  

carmichaels123

New member
Joined
Jan 18, 2015
Messages
4
Location
carmichaels,pa
Tractor
kubota2370
We committed to purchasing a new bx2370 with a 54" manual blade for plowing on 1/6/15. All implements are in but the plow. The dealer states we may not be able to get it until late Feb. or March.
Is anyone else experiencing difficulties getting parts from Kubota.

Any help would be appreciated.
 
   / Running out of patience #2  
It's not a issue isolated to Kubota, plows are in high demand right now. It was a harsh winter last year and typically snow removal equipment is a big seller the following year.
 
   / Running out of patience #3  
First off welcome to the forum , you are not alone waiting for snow equipment as others are in the same boat as you . You might be able to pick up a rear blade from someone else if that would help , like from tsc or everything attachments etc. .
 
   / Running out of patience
  • Thread Starter
#4  
First off welcome to the forum , you are not alone waiting for snow equipment as others are in the same boat as you . You might be able to pick up a rear blade from someone else if that would help , like from tsc or everything attachments etc. .

You would think the manual ones would be in stock. The dealer said computer is saying available 1/15, but kubota is telling him Feb or March.
 
   / Running out of patience #5  
We have heard other stories about inventory, not just Kubota. This is a bad time of year for any equipment related to snow removal, so I'd say you just need to accept it's not going to be in stock for a while. If you wanted to be sure about availability, the time to order would have been about 6 months ago, before the winter rush (especially after last winter).
 
   / Running out of patience #6  
Sounds like the company that makes the blades for Kubota is out of stock. Try another brand.
 
   / Running out of patience #7  
Not just Kubota,I had a friend purchase a JD 1023E with blower.....problem can't get the blower!
 
   / Running out of patience #8  
We committed to purchasing a new bx2370 with a 54" manual blade for plowing on 1/6/15. All implements are in but the plow. The dealer states we may not be able to get it until late Feb. or March.
Is anyone else experiencing difficulties getting parts from Kubota.

Any help would be appreciated.

As others said, getting snow removal equipment in season can be dificult especially in difficult or following difficult snow years. BTW a complete blade assy is not a part but an attachment. I am sure that if you needed a "part" for your front blade it would be easier to get.
 
   / Running out of patience #9  
Now try to say difficult 3 times in one sentance, spelling it two different ways!!
 
   / Running out of patience #10  
I have had the same used Kubota for 34 years. It is a pain to not have it now but, in the long run you will be okay. Motivating me to put some 3pt. blades out for sale, instead of lying out back. I pick mine up at auctions threw out the year and only buy if really selling low.
 

Tractor & Equipment Auctions

FRONTIER AV50H LOT IDENTIFIER 102 (A53084)
FRONTIER AV50H LOT...
49" X 79" EXPANDED METAL RAMP GATE (A51247)
49" X 79" EXPANDED...
JOHN DEERE 1705/6700 LOT IDENTIFIER 20 (A53084)
JOHN DEERE...
2017 Bayliner VR5 21ft Bowrider Boat with 29ft T/A Boat Trailer (A51694)
2017 Bayliner VR5...
THRESHOLD 30" SQUARE OUTDOOR GAS FIRE TABLE (A51248)
THRESHOLD 30"...
2021 MACDON C3812 LOT IDENTIFIER 34 (A53084)
2021 MACDON C3812...
 
Top