Satoh Beaver Hydraulic Tap

[WildWest]

I have a FEL I want to add to my Satoh Beaver S370D 4x4

Is there a plate i can buy that bolts on to my hydraulic line for take off?

what are my options i prefer not to cut my hard line im afraid it would be metric or something oddballed

 

[Mundy]

Try "Valley Power". They were talking about making some Hyd PTO adapter plates or may have one.

The pressure line is metric. Most hydraulic shops should be able to order fittings to loop into the metric pressure line.

I have a Blackhawk loader on my Beaver. I am thinking of adding a PTO pump and reservoir to speed things up. The pump on the tractor is only 3 or 4 gpm @ 2700RPM and can seem very slow when powering the loader. I find it hard to run the machine at high RPM doing loader work so then it is even slower.

Regards,
Mundy

 

[WildWest]

Well the loader i have has an underbelly resivoir/belt driven pump its off some kind of cub cadet lawn tractor or something.

I have to get a few lines and i am going to take it apart and clean everything it has some water in the cylinders.

But i had thought about running the pump instead of having to mess with my tractor hydraulics

Do you have pics of how your loader is tied in?

 

[Mundy]

Are you talking subframe or Hydraulic?

Here is a link to hydraulic PTO adapter view. Satoh Parts

If your talking subframe I can email you a pic. You will have to supply an email. Your profile will not allow email contact.

Regards,
Mundy