Satoh S650G with National Loader

[jshanley]

I have a Satoh S650G with a National Loader. I just replaced some seals on a couple cylinders and replaced a couple Hyd lines that were shot. Now when I start the tractor it is making a squealing noise by the pump which is located at the front of the motor. It sounds to me like it has lost it's prime. Any suggestions would be greatly appreciated as to how to prime the pump if that is what is really going on.

Thanks,

jason

 

[J_J]

Are you sure you installed the hoses in the correct position. If the pump has good suction, and good pressure, with all valve is neutral there should be free flow to tank. What position is you 3pt lever. It should not be all the way up. Do you have a hyd gage? That will help you trouble shoot the hyd system.

 

[jshanley]

I will check that tonight.. Thanks for the reply.