DEWFPO
Veteran Member
- Joined
- Jun 2, 2007
- Messages
- 1,100
- Location
- "Up High in the Rockies"
- Tractor
- 2009 Bobcat Toolcat 5600 D
Can someone confirm or deny the following info please :
8.0 Hydro Motor Pkg = High speed, Low Torque Fan, 2 hydro hoses connected to Toolcat, best to run in LO FLOW rather than HI FLOW because hydro fluid can get pretty hot (even though the Toolcat automatically turns on Hi Flow when the electrical on the SB200 is connected.)
9.6 Hydro Motor Pkg = Low speed, High Torque Fan, 3 hydro hoses connected to Toolcat, can be run in HI FLOW mode with no worries.
Thanks, DEWFPO
8.0 Hydro Motor Pkg = High speed, Low Torque Fan, 2 hydro hoses connected to Toolcat, best to run in LO FLOW rather than HI FLOW because hydro fluid can get pretty hot (even though the Toolcat automatically turns on Hi Flow when the electrical on the SB200 is connected.)
9.6 Hydro Motor Pkg = Low speed, High Torque Fan, 3 hydro hoses connected to Toolcat, can be run in HI FLOW mode with no worries.
Thanks, DEWFPO