SC2400 Repair/Service manual

[Will D]

I inadvertently twisted and broke a steel hydraulic tube (#1 off of the optional coupler on the lower right side of my tractor) and I need to order a new one from cub cadet. I tried online to enter my tractor model number at Yanmar and cub cadet to get the part number but nothing comes when I enter my tractor model number. Does anyone have a Service or Repair manual for this tractor, or can tell me what the part number is for this tube. Thanks

 

[Will D]

I was able to get a picture of the part I need but still no part number. Gonna try and attach what I found so far. on the second page of the document in figure 8, it is the upper B hydraulic line.

 

[gtrippleb]

I replied to your other post in the Implement Control Valve thread.

http://www.tractorbynet.com/forums/cub-cadet-yanmar-cuts/272198-sc2400-implement-control-valve.html#post3314009

 

[SHStremler]

I broke the shift lever bracket that attaches to the High/Low shaft from the hydrostatic transmission on my Sc2400 Cub Cadet/Yanmar tractor. I've removed the alignment set screw but the bracket doesn't seem to want to come off the shaft. I don't want to break any thing inside the transmission.
I'd also like a IPB of the shift lever and related parts. I've repaired the handle a couple of times but I need to replace missing parts now.

 

[msb1766]

Here is the Technical Manual:
Sc245 Sc Series Sub-Compact Tractor - Technical Manual

 

[SHStremler]

Thanks. At least now I know what the part is called: 'sub shift lever', and the process for removing it is straight forward.