knukey
Bronze Member
I found these pictures online, perhaps someone here. Who has done this and how'd it work for you?
Snow Scraper blade mounted to FEL?
- Thread starter knukey
- Start date
- Views: 1188
s219
Super Member
- Joined
- Dec 7, 2011
- Messages
- 8,607
- Location
- Virginia USA
- Tractor
- Kubota L3200, Deere X380, Kubota RTV-X
Seems like a real good way to bend the crap out of the loader arms!
Utopia Texas
Platinum Member
- Joined
- Aug 11, 2013
- Messages
- 767
- Location
- Brookshire & Cat Spring,Texas
- Tractor
- Kubota B2650 / Kubota L6060 / Kubota ZD2300
Farm type tractors were not designed to "push" rather their strength is in "pulling" though many of us have attempted to make them into bulldozers at one time or another!
Loadstar
Platinum Member
Seems to me it would be more effective where it belongs.
wedge40
Veteran Member
- Joined
- Oct 8, 2007
- Messages
- 2,197
DocDryden
Gold Member
I agree, but then again what do i know
Skidsteer 3 Point Attachment Adapter Skid Steer Case 3pt MP | eBay
jimmysisson
Veteran Member
- Joined
- Jul 11, 2005
- Messages
- 2,358
- Location
- W.Mass
- Tractor
- 1993 NH 2120 (the best), 1974 MF 135 (sold, but solid), 1947 Farmall A (bought, sold, bought back, sold again), 1956 MH50 lbt (sold, in 1980, darn it)
I'd think main problem is the blade is so far out in front. If just pushing light debris, it might serve. Would be a lousy grader; too touchy at the loader controls to do any leveling. And so far out front those small front tires rolling over a stick would bump the blade up in the air. Might be able to push light snow with it, if you don't hit anything. My $.02
Jim
Jim