seat switch

   / seat switch #2  
I have a 2009 Case DX40 can anyone tell me how to disconnect seat switch ?

you by pass the switch (dry contact that would close by weight if occupant on the seat), and short out the connector on the socket to send fake signal.

JC,
 
   / seat switch #3  
It is a little more trouble, but installing by-pass switch would allow you to enable/disable safety function. Much safer if you have multiple operators.
 
   / seat switch #4  
It is a little more trouble, but installing by-pass switch would allow you to enable/disable safety function. Much safer if you have multiple operators.

Agree. I jumpered the seat-switch and routed it to a separate on/off switch. Although I tend to leave the safety feature in the "disable" mode, I still think it's a good idea to be able to enable it quickly and easily if needed.
 

Tractor & Equipment Auctions

48 PIECE HEAVYEQUIPMENT KEY SETS (A53843)
48 PIECE...
2014 DRAGON 500 BBL FRAC TANK (A53843)
2014 DRAGON 500...
4 - GOODYEAR LT275/65R20 (A53843)
4 - GOODYEAR...
2019 GENIE GTH-5519 TELESCOPIC FORKLIFT (A52706)
2019 GENIE...
2017 Hino 268 20' Flatbed Dump Truck (A52377)
2017 Hino 268 20'...
AIRMAN PDS 100S COMPRESSOR (A53843)
AIRMAN PDS 100S...
 
Top