Sheridan Pellet Rifle Fix

   / Sheridan Pellet Rifle Fix #1  

oldballs

Elite Member
Joined
Dec 29, 2009
Messages
4,478
Location
Kansas...USA
Tractor
Kubota B2620 , Case 448 , Kubota B2650
My 20 cal (5MM) pellet rifle will not hold pressure any more. I can't see anything obvious to repair without taking it apart. Anybody have some ideas on a fix? I'd kinda like to know where I'm going with the fix before taking it apart. It is aBenjamin- Sheridan Blue Streak CB9. It is a pump type.

Cheers
Mike
 
   / Sheridan Pellet Rifle Fix #2  
I had Gary Thiry in Sacramento Ca rebuild a Silver Streak my Dad got in the 1940's. worked like a charm after. All the seals were shot, and had to be replaced. He does a lot of air rifle work. He might sell the parts...
 
   / Sheridan Pellet Rifle Fix #3  
My Brother had one back in the 80's that was a deadly gun, the 5mm were harder to come by in the states. He ordered a rebuild kit for it in late 90's and made it like new, then it was lost in a fire.
Look online, (google it) I'm sure Amazon and or Ebay could develop leads to the parts kit.

Mark
 
   / Sheridan Pellet Rifle Fix
  • Thread Starter
#4  
Thanks, Robert & Spike. I hope to rebuild it myself....it's probably just some O-ring type problem....I hope.
 
   / Sheridan Pellet Rifle Fix #5  
You could try "seal swell"..... It's an additive that causes all types of seals to swell up and re seal.... I've used it in power steering stuff and it works... the leaks stopped...
 
   / Sheridan Pellet Rifle Fix
  • Thread Starter
#6  
Sounds like a quick fix if I could get at the seals, Dave. Think I'll try for disassembly and replace the seals first.
 
   / Sheridan Pellet Rifle Fix #7  
You don't need to disassemble the rifle.... just put a drop in the oil lube hole that lubes the air compressor tube.... Is there a felt you add oil to... I had a Benjamin air rifle and added a drop or so of oil to the felt oiler.... Also, there is a check valve that may have some stuff in it.... shoot a bunch of WD or something similar in the compressor tube to flush out garbage.. then oil... etc.... pump, shoot... pump, shoot... etc. to try and clear stuff out... Dave
 
   / Sheridan Pellet Rifle Fix
  • Thread Starter
#8  
Okay, what do I have to lose. I have two Sheridans. The old one is from the 70's. It has no pressure at all plus the barrel solder pulled away from the pump cylinder. Maybe I'll experiment with that one first. The newest one is a 2002 model and it is starts losing air after a couple minutes.

But everyday seems to be full of "things-to-do". Right now both rifles are laying on the front room couch.....waiting for me to get-er-done.:eek:
 

Tractor & Equipment Auctions

2003 Honda ATV (A50324)
2003 Honda ATV...
John Deere 9450 Combine (A50514)
John Deere 9450...
2013 Ford E-350 Enclosed Service Van (A50323)
2013 Ford E-350...
2009 CATERPILLAR 420E BACKHOE (A51406)
2009 CATERPILLAR...
2003 GMC C5500 DUMP TRUCK (A51406)
2003 GMC C5500...
2013 Chevrolet Cruze LS Sedan (A50324)
2013 Chevrolet...
 
Top