Shopping but Unsure

   / Shopping but Unsure #1  

yarddogg

New member
Joined
Feb 11, 2009
Messages
2
This is my first posting, new member, so im happy to meet everyone.
Im looking at a YM2000 4wd and i am impressed with the way it drove
and features it has over other brands ive had. However, im not real
keen on the noise this has when at idle. Is all this rattle normal? The
dealer had several on the lot and the 2 i tried sounded the same. Also
is this model ok regarding parts,reliabilty etc. Thanks
 
   / Shopping but Unsure #2  
Best to check the Yanmar forum down below, but in a nutshell, the rattle is most likely normal (I believe it is generally referred to a Yammer-Hammer). The 1300D that I had made that noise, but my F16d (which is a 3 cylinder) does not.

I'm not sure if the YM2000 is 2 or 3 cyl.

Good luck with your search. Take care.
 
   / Shopping but Unsure #3  
Yep.. probably yammer-hammer.

the 2000 is a decent machine.. even has a water pump.

soundguy
 
   / Shopping but Unsure #4  
This is my first posting, new member, so im happy to meet everyone.
Im looking at a YM2000 4wd and i am impressed with the way it drove
and features it has over other brands ive had. However, im not real
keen on the noise this has when at idle. Is all this rattle normal? The
dealer had several on the lot and the 2 i tried sounded the same. Also
is this model ok regarding parts,reliabilty etc. Thanks


The reason for the noise( hammer) it's a 2 cyl. There is a 2000D ymg mod that is a 3 cyl. Most likely you are looking at a 2 cyl mod
 

Tractor & Equipment Auctions

2020 Utility Trailer Manufacturing, 53' Trailer (A52384)
2020 Utility...
2004 FORD E350 MECHANICS TRUCK (A53426)
2004 FORD E350...
2018 HINO 195 16FT BOX TRUCK (A53426)
2018 HINO 195 16FT...
Soosan 140 Hammer 30 ton Class (A52384)
Soosan 140 Hammer...
2025 K5436 UNUSED (5) Wire Mesh Panels (A53117)
2025 K5436 UNUSED...
6"x8' Treated Post,  Approx. 28 Piece Bundle  (A52384)
6"x8' Treated...
 
Top