DASDAVID
New member
Hi, I have a TN-55 that I had a trans pressure light on and plenty of oil, I replaced the switch the light went out and I used the tractor to grade with. After about 30 minutes of use the shuttle just stopped short and would not re engage.
I towed the running tractor back to the barn and had the pressure light back on in intervals depending on how much throttle I used but still would not go in gear. Any ideas? Thanks, David
I towed the running tractor back to the barn and had the pressure light back on in intervals depending on how much throttle I used but still would not go in gear. Any ideas? Thanks, David
