jdwb
New member
I am thinking about buying a Mahindra 5530 4 WD with front end loader and am told I needed a single remote valve. Is this for the back hydraulics to use with a hay cutter, rake and/or hay baler?
Single remote valve
- Thread starter jdwb
- Start date
- Views: 1622
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Well now, you can install a single remote valve, but you will probably want more spools later for things like T-N-T.
I would suggest a 4 spool valve.
Here is a one spool valve with PB.
http://www.surpluscenter.com/item.asp?item=9-7861&catname=hydraulic
4 spool valve with PB.
http://www.surpluscenter.com/item.asp?item=9-7978&catname=hydraulic
I would suggest a 4 spool valve.
Here is a one spool valve with PB.
http://www.surpluscenter.com/item.asp?item=9-7861&catname=hydraulic
4 spool valve with PB.
http://www.surpluscenter.com/item.asp?item=9-7978&catname=hydraulic
Last edited:
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,690
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
When you are working with a little bigger tractor as in the 5530, there are a lot more of the implements that have or can have hydraulics to do some of the adjustments or activation of the implement. I have 3 remotes on two of my tractors and I really need 4 on each one of them. If you do go with some rear remotes and do not go the OEM route, then I too would be installing a 4 valve setup. I believe that with the 5530, Mahindra only offers 2 remotes at the most and pretty pricey. The OEM setup is usually a little nicer & cleaner looking than the aftermarket stuff, but is quite a bit more $$$$. Anyway that you look at it though, it would be nice to have the remote there if you need it. 