Skid plate

[Imold]

I received my skid plate today and I must say it is a well made 3 piece add on, can稚 wait to get out to the property and install it, no more worries about tearing the fan or filter up.

 

[kenmbz]

I received my skid plate today and I must say it is a well made 3 piece add on, can稚 wait to get out to the property and install it, no more worries about tearing the fan or filter up.
View attachment 661833
View attachment 661834

This is in 2 pieces? Looks nice. Let us know how long it takes to install and what you think of it please.

 

[MoMower]

Patiently awaiting the big brown truck of happiness for mine!

 

[dndhurl]

I received mine yesterday, waiting to install after the holiday weekend. It will give me more peace of mind when brush hogging the jungle on my back property.

 

[Imold]

I am going to change my hydrolic fluids then instal the new skid plate, weathers been bad here and I need to do it out side, also got the first layer of class 5 down for my new shop build, went from this. To this, all work done wit the GC1705.


Now.

 

[Imold]

Will be a 30x40 shop.

 

[kenmbz]

30x40 sounds nice!

 

[Imold]

Thanks! Ya it will be nice when I start building it I am just getting a Menards pole shop kit and I will finish the inside as I see fit for my needs, Building it as extra funds allow. I have too many other hobby things that also need funding, one day I will learn I only need one or two hobbies besides hunting and fishing.

 

[Gofast]

This is in 2 pieces? Looks nice. Let us know how long it takes to install and what you think of it please.

They are three pieces.
The one for new tractors is a little easier to install because it using existing nuts that are welded into the frame at the factory.




Version 1 for older tractors we are now including a finger wrench to help start the top two nuts.

 

[Imold]

Put my skid plate on today and I think it was about a 15-20 minute job when all said and done, also hydraulic fluid is done now.

 

[Gofast]

I wanted to thank everyone that has purchased so far. This is now or most popular product.
We are happy to do our part saving one GC 17xx hydraulic fan at a time.

Yes we have some in stock.
They can be ordered here with flat rate shipping.
https://retailrems.com/purchase

 

[shovelmike]

Thanks! Ya it will be nice when I start building it I am just getting a Menards pole shop kit and I will finish the inside as I see fit for my needs, Building it as extra funds allow. I have too many other hobby things that also need funding, one day I will learn I only need one or two hobbies besides hunting and fishing.

Nice, indeed we do what we can as we can. My building started as a 13 x 36 loafing shed kit from Payless Cashways, a couple of years later I extended up and out. Ended up as 26 x 36 with a shed roof.
The only thing I should have done better was to construct it in a fashion to keep water out of the end grain of the rafters.
Regarding skid plate, I'm waiting for one for Mahindra, I don't have means to construct my own.

 

[Gofast]

Nice, indeed we do what we can as we can. My building started as a 13 x 36 loafing shed kit from Payless Cashways, a couple of years later I extended up and out. Ended up as 26 x 36 with a shed roof.
The only thing I should have done better was to construct it in a fashion to keep water out of the end grain of the rafters.
Regarding skid plate, I'm waiting for one for Mahindra, I don't have means to construct my own.

I just found out there is a Mahindra dealer not that far from me. When things slow down I will talk to him see if I could get measurements from one and do a test fit.
Are there many accessories offered for Mahindra? eMax 22 are they the same for a few years.