Loader Slop with use of bucket

   / Slop with use of bucket #1  

drpractor

New member
Joined
May 6, 2016
Messages
1
Location
Granville, NY
Tractor
Kubota L3300
I recently purchased a used Kubots L 3300, it seems there is some play in the bucket pins when changing the position , is it as simple as just replacing some of the pins or are there bushings that will have to be replaced?
 
   / Slop with use of bucket #2  
You need to look at the pins and holes to see if they are egged out. Often times it's both. If the loader wasn't lubed regularly, it can be pretty bad.
 
   / Slop with use of bucket #3  
My L4400 always had a tiny bit of slop at the bucket (even new) when rolled all the way back.
 

Tractor & Equipment Auctions

2013 Dodge Journey SXT (A50324)
2013 Dodge Journey...
FIATALLIS MOTOGRADER (A50854)
FIATALLIS...
https://www.accessnewswire.com/newsroom/en/healthcare-and-pharmaceutical/slimjaro-vs-burnjaro-reviews-a-comprehensive-analysis-of-benefits-and-1044755
https://www.accessn...
2013 FREIGHTLINER CASCADIA (A50854)
2013 FREIGHTLINER...
2013 Chevrolet Malibu Sedan (A50324)
2013 Chevrolet...
2000 KOMATSU VALMET 860.4 FORWARDER (A51222)
2000 KOMATSU...
 
Top