thisdj1
Member
Small hose identification needed *Photo Added*
I have a 2006 Case DX45 and I noticed tonight that I seemed to be leaking some hydraulic fluid. I cleaned the area around the pump and attempted to find the leak. Luckily, I was able to find it rather quickly. However, I can't figure out what the hose part number is or what it does exactly. It reminds me of a vacuum line as it is only attached with a little spring clip. The hose is only about 6" long and I can't figure out what it attaches to on the top end as I'm not too familiar with what all of the parts are in the hydraulic system. The bottom end attaches to what appears to be a T of some sort. Coming off of one of the other sides is a larger rubber hose that attaches with a hose clamp and runs back towards the cab and ends behind the fuel/water separator. The hose has a hole in it just above the T connection and I think my problem will be solved if I can get it replaced. I appreciate all of the help!
I have a 2006 Case DX45 and I noticed tonight that I seemed to be leaking some hydraulic fluid. I cleaned the area around the pump and attempted to find the leak. Luckily, I was able to find it rather quickly. However, I can't figure out what the hose part number is or what it does exactly. It reminds me of a vacuum line as it is only attached with a little spring clip. The hose is only about 6" long and I can't figure out what it attaches to on the top end as I'm not too familiar with what all of the parts are in the hydraulic system. The bottom end attaches to what appears to be a T of some sort. Coming off of one of the other sides is a larger rubber hose that attaches with a hose clamp and runs back towards the cab and ends behind the fuel/water separator. The hose has a hole in it just above the T connection and I think my problem will be solved if I can get it replaced. I appreciate all of the help!
Last edited:
