Snow snow plow attachment for 200cx loader

[earthly2]

can you hook up a snow blade to the 200cx loader
I know you can do it with the 300cx loader when you remove the bucket.
with this method you could move the snow and when it get s to high you can at least raise the loader to pull down the mound and then move it around

 

[BloomingtonMike]

Just so you know, the loader mounted blade for the 300CX is a complete plow system (angling system, springs, etc and not just the blade. I have some pictures on my site linked in my sig line. Hope that helps. I am not sure how wide the 200CX loader is but if you want me to measure my blade just let me know. I know that the 72" blade is about 440lbs and very long - sticks pretty far out there on teh 3X20 tractor. If it fits you are going to need some serious rear weight.

 

[JasonL]

I don't think JD makes a blade to fit a 200cx loader. You could always rig one up though as many of us have here on TBN. Do a search for FEL Snowplow. I converted an old Western plow to fit on my 410 loader (older version of 200cx). Here is a link.
http://www.tractorbynet.com/forums/attachments/69523-fel-snowplow.html

 

[Nuru]

I don't think JD makes a blade to fit a 200cx loader. You could always rig one up though as many of us have here on TBN. Do a search for FEL Snowplow. I converted an old Western plow to fit on my 410 loader (older version of 200cx). Here is a link.
http://www.tractorbynet.com/forums/attachments/69523-fel-snowplow.html

Definitely an excellent job you accomplished on that one.

 

[Nuru]

Fortunately for me, I bought a 54inch blade with my tractor and got the loader recently (200cx), Once I get my shed (Weeks away), I will have a place to stretch out my attachments so I can switch the two off an on.

 

[hppyfngy]

Fortunately for me, I bought a 54inch blade with my tractor and got the loader recently (200cx), Once I get my shed (Weeks away), I will have a place to stretch out my attachments so I can switch the two off an on.

Hey Nuru, does the 54 attach to the 200cx without modification?

I just got my 2210 w/ a 54" blade and I absolutely need a 200CX...but there's still some snow to move.

(noob question)